CHAR-013
Materials Characterization & Metrology
PhotoBattery can define, execute, and validate this work as a measurable engineering engagement - from specification freeze and method selection through evidence review, acceptance testing, and decision-ready recommendations.
Thin-Film Adhesion, Delamination & Interface Strength Testing is a structured engineering service for organizations that need a defined technical answer, a validated process or test path, and evidence suitable for the next design, qualification, or investment decision. The work can address scratch testing; peel or pull testing; cross-hatch evaluation where applicable; thermal-cycle exposure; microscopy of failure surfaces; interface root-cause analysis. PhotoBattery selects and applies roll-to-roll coater; slot-die/gravure/inkjet head; web tension control; drying/curing module; inline optical inspection; SEM/FIB-SEM, then evaluates the result against measurement uncertainty stated; spatial resolution/scan grid documented; controls and references included; data traceability preserved.
Our team translates your technical objective into a controlled work package with the right tools, evidence, checkpoints, and acceptance criteria. You receive traceable results and a practical next-step recommendation rather than a generic assessment.
Engagements begin with the samples, architecture, process history, operating limits, and success metric you provide. We then confirm the test or engineering path, control measurement uncertainty, document dependencies and risks, and align the deliverables to the decision you need to make.
Catalogue reference: service CHAR-013, source page 92.
| Service code | CHAR-013 |
|---|---|
| Technical field | Materials Characterization & Metrology |
| System under test | scratch testing; peel or pull testing; cross-hatch evaluation where applicable; thermal-cycle exposure; microscopy of failure surfaces; interface root-cause analysis; Thin-Film Adhesion; Delamination |
| Equipment & methods | roll-to-roll coater; slot-die/gravure/inkjet head; web tension control; drying/curing module; inline optical inspection; SEM/FIB-SEM; AFM |
| Required client inputs | sample set and controls; expected structure/composition; failure or comparison question; required resolution/uncertainty |
| Deliverables | measurement report; raw and processed data; uncertainty and method notes; interpretation tied to process variables |
| Accuracy / target metrics | measurement uncertainty stated; spatial resolution/scan grid documented; controls and references included; data traceability preserved |
| Lead discipline | Best staffed by a materials characterization scientist |
Best staffed by a materials characterization scientist. Engagement should begin with a one-page specification freeze, sample/data access plan, and acceptance-metric agreement. Avoid claiming production readiness until repeatability, measurement uncertainty, and process ownership are documented.
Share the objective, available samples or data, constraints, and acceptance target.
Required fields are marked below. Your message will be sent directly to the inquiry team.